McCrometer”s Wafer-Cone flowmeter is designed for liquid or gas service in line sizes from 1/2″ to six inches. Applications range from chemical injection or filtering in process lines to general plant needs, such as lines for natural gas, chilled water supporting burners or ovens, cooling systems, and HVAC. The meter relies on differential pressure sensing technology with built-in flow conditioning to achieve an accuracy of +/- 0.5 percent, with a repeatability of +/- 0.1 percent. It operates over a flow range of 10-to-one. With the ability to self-condition flow, the meter supports confined spaces, eliminating the need for the extensive up/down stream straight-pipe runs required by other DP technologies, such as orifice plates and venturi tubes. Minimal straight-pipe run of zero to three diameters upstream and zero to one diameter downstream from the flowmeter.