McCrometer”s V2 System flowmeter features a transmitter that now supports the HART Protocol, making the task of integrating flow measurement communications with control systems and other process equipment easier. Applications include remote process variable interrogation, cyclical access to process data, parameter setting and diagnostics. The V2 System flowmeter supports line sizes from four to 18 inches, and is a good fit wherever irregular or crowded piping and equipment conditions make other flow technologies impractical or unworkable. Pre-packaged and ready to install, the flowmeter features a built-in, three-way valve that isolates the transmitter from the process fluid flow for easy maintenance without shutting down the pipeline. It arrives from the factory wet-flow calibrated and measures flow over a wide flow range from 40 to 7,500 gallons per minute, depending on the line size. The flowmeter”s cone conditions fluid flow to provide a stable flow profile that increases accuracy. The cone’s central position in the line optimizes the velocity of the liquid flow at the point of measurement. Accuracy is +/- 1 percent, with +/- 0.1 percent repeatability over a flow range of 10-to-one. Straight pipe run requirement is zero to three diameters upstream and zero to one diameters downstream from the flowmeter.