Peter Paul Electronics Company now offers manual override for its full line of Series 80 large-orifice solenoid valves. Manual override is a mechanical device to open normally closed (NC) valves or close normally open (NO) valves without power. Valves can be fully opened and closed while de-energized, either under pressure or not. Manual override is used to actuate valves during power failure or in an array without disturbing the electrical sequencing or piping to these valves. Standard Series 80 solenoid valves are designed for process industries for high flowrate or quick dump-and-fill capacity. Typical applications include: oil, gas, petrochemical, pharmaceutical & food processing, washing machines, air dryers, fuel oil & gas burners, pumps, irrigation, dishwashers, water treatment, compressors, etc. They are also suited for low pressure gas and liquid applications. The valves are offered with AC or DC power, in port sizes from 3/8” to three inches NPT, with pressure ratings from zero to 200 PSI. Valve bodies are of forged brass or 316 stainless steel. Seals of BUNA, FKM, EPDM, Neoprene and TEFLON are available and compatible with most media.