Schroeder Industries” SC automatic self-cleaning filters are designed to remove solid contamination from process fluids and to protect the integrity of high-grade components that depend on low-viscosity, water, or water-based lubricants. The filters are a good fit for applications where fluid flow cannot be interrupted and must be maintained at an acceptable cleanliness level. The filters can achieve flowrates up to 33,000 GPM with ANSI flange sizes ranging from two to 36 inches. Particle removal is accomplished with slotted-tube filter elements ranging from 50 to 3,000 microns and super-mesh filter elements from 25 to 40 microns. Due to the filters unique single-element cleaning process, total filtered flow is not reduced during the cleaning process. The filters are available in a range of sizes – from the smallest SC02 up to a high-capacity SC36. The SC02 filter can handle up to 120 gallons per minute of water or low-viscosity fluids. The SC04-SC08 can filter up to 1,980 gallons each minute, while the SC10-SC36 can take on 33,000 gallons of water a minute.