ValMatic Rubber Seated Ball ValveVal-Matic’s Ener•G Rubber Seated Ball Valve is a versatile design for tight seating, energy savings and long life. The ball valve’s Tri-Loc seat retention system uses technology that has been proven in the field for over 35 years. Both single- and double-seated valves are available for sealing in one or two directions with the resilient seat completely out of the flow stream when fully open. Also when fully open, the ball valve provides 100-percent flow area equal to the pipe size and represents a significant savings in pumping costs compared to other pump control valves, Val-Matic says. The valves’ rugged AWWA construction and interior/exterior coating of NSF 61 fusion bonded epoxy contribute to long valve life. The rubber seated ball valve is available in AWWA Classes 150 lb. and 300lb. in sizes 4 inches to 48 inches with cylinder, electric motor or manual actuation for pressure ranges up to 300 PSI. The ball valve fully complies with AWWA C507 and is WQA Certified Lead-Free in accordance with NSF/ANSI 372.