Fluid Components International”s Model CMU Coriolis mass flowmeter is a U-tube design that supports line sizes of 1/4″ to 12 inches (DN 8 to DN 300). The meter measures flowrates from 2.2 to 80,800 lb/hr (60 to 2,200,00 kg/hr) and features a lightweight tube, minimal welding, and vibration dampening technology. Accuracy range is 0.1 to 0.15 percent in liquids (depending on line size) and 0.5 percent in gases (plus reading). In applications where density measurement and/or variable fluid densities are prevalent, the CMU is available with special optional density calibrations. Selections include a three-point, or for greater accuracy, a five-point density calibration. A ruggedized full-featured transmitter, the Model CT, is available to support the CMU flowmeter. Available as a blind transmitter or with an integral two-line LCD digital display, the transmitter is the electronics interface to the sensor and an array of analog and/or digital outputs. Standard outputs include dual four to 20 mA, one standard with HART, a frequency/pulse output of total flow, and a binary output of instrument status. Output options include Profibus-PA and a tamper-proof, custody-transfer configuration that is sealed/certified and prevents resetting of the internal totalizer. The CT can be mounted integral with the sensor or remote mounted up to 1000 feet (300 m) away.