QUIZ CORNER: Why Was a Control Valve Installed Upstream of a Flowmeter?

Sept. 17, 2014

My initial gut reaction is that whoever designed the piping had little or no instrumentation background. Further, all of the instrumentation work performed in conjunction with the installation is suspect.

David W. Spitzer

Commentary

My initial gut reaction is that whoever designed the piping had little or no instrumentation background. Further, all of the instrumentation work performed in conjunction with the installation is suspect. 

Why? People familiar with flow measurement know that flowmeters often require a good velocity profile upstream of the flowmeter to measure accurately. Throttling a control valve causes its velocity profile downstream to become distorted.  Flowmeter performance can be significantly degraded by locating the control valve (and its distorted velocity profile) upstream of a flowmeter. Locating the control valve downstream of the flowmeter keeps its velocity profile distortion downstream—far from the flowmeter—so it does not affect the flow measurement.

Additional Complicating Factors

I have yet to encounter an application where a control valve is legitimately required to be located upstream of the flowmeter. I suspect that there might be a handful of such applications out there somewhere—if only because there always seem to be a few exceptions to the rule. If you find such a process, please let me know so I can incorporate it into my seminars. 

David W. Spitzer is a regular contributor to Flow Control magazine and a principal in Spitzer and Boyes, LLC offering engineering, seminars, strategic marketing consulting, distribution consulting and expert witness services for manufacturing and automation companies. He has more than 35 years of experience and has written over 10 books and 250 articles about flow measurement, instrumentation and process control.

Mr. Spitzer can be reached at 845 623-1830 or www.spitzerandboyes.com. Click on the “Products” tab to find his “Consumer Guides” to various flow and level measurement technologies.

Sponsored Recommendations

Clean-in-Place (CIP) Solutions for Life Sciences Process Manufacturing

Learn how Emerson's measurement instrumentation can improve safety and reduce cross-contamination during CIP processes for life sciences process manufacturing.

Wireless Pressure Monitoring at Mining Flotation Cell

Eliminate operator rounds and improve flotation cell efficiency using reliable, wireless technology

Green hydrogen producer ensures quality of the network’s gas blend using a gas chromatograph

Case Study: Revolutionizing Green Hydrogen Blending with Precise Monitoring.

Overcome Measurement Challenges in Life Sciences

See how Emerson's best-in-class measurement instrumentation can help you overcome your toughest life sciences manufacturing challenges.