McCrometer’s V-Cone Flowmeter for oil/gas land-based and offshore production and refining applications. The meter features built-in flow-conditioning technology and performs well in wet-gas applications with the use of a correlation to offset the over-read. Its no-moving-parts design also requires virtually no maintenance over a life in excess of 25 years. The space-saving meter nearly eliminates the up and downstream straight-pipe runs usually required, reducing typical straight-pipe run by 70 percent or more, requiring 0-3 straight pipe diameters upstream and 0-1 downstream for precise operation. The meter’s centrally located cone interacts with the fluid steam, reshaping the velocity profile to provide a stable signal that increases measurement accuracy. The meter serves line sizes from 0.5 to greater than 120 inches in materials and flanges compatible with many applications. It operates over a wide flow range of 10-to-1, which typically covers the entire flow range required for wet-gas applications. – mccrometer.com