Endress+Hauser has announced its May and June 2015 schedule of instrumentation training courses. Classes typically are a combination of classroom and hands-on training on either the Endress+Hauser Process Training Unit (PTU™), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands, both designed to simulate operating conditions.
For information on all E+H training schools, go to: www.us.endress.com/en/events/training
Courses include:
May Training Events
F-103 Coriolis Flow School
May 1, 2015
Chalfont, Pennsylvannia
The Endress+Hauser Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements.
C-203 Fieldcare Plant Asset Management Training
May 4, 2015
La Porte, Texas
After completing this course, participants will understand what Plant Asset Management means, what can be the scope and how it can be used to improve a process. They will understand the differences, advantages and disadvantages of analog and digital data transmission in terms of configuration and maintenance.
L-104 Free Space and Guided Radar
May 5, 2015
La Porte, Texas
This is an introductory course (8 hours) for Free Space and Guided Wave Radar Level for maintenance and engineering personnel. We will dedicate a half day to each technology to give you a basic understanding of these level technologies. The class will be a combination of classroom and hands-on training on a PTU® (Process Training Unit).
I-101 Basic Instrumentation School
May 5-6, 2015
Greenwood, Indiana
The Endress+Hauser introductory course to instrumentation will provide maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations.
L-102 Advanced Level School
May 5-7, 2015
Matthews, NC
The Advanced Level School begins with a brief review of current level technologies. Following the technology refresher, we will proceed to look deeper at each level measuring technology discussing then implementing proper techniques of configuration and calibration and troubleshooting. There will be an emphasis on an in depth understanding of Time of Flight, ToF technologies and envelope curves. This class will primarily be focused on hands-on training at our PTU® (Process Training Unit).
L-103 Time-of-Flight School
May 7, 2015
Greenwood, Indiana
The Endress+Hauser time-of-flight course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters.
I-102 Instrumentation Technology School
May 11-15, 2015
Gonzales, Louisiana
The Endress+Hauser extended course in process instrumentation will provide maintenance and engineering personnel with a deeper understanding of the principles explored in our Basic Instrumentation School.
I-101 Basic Instrumentation School
May 12, 2015
Matthews, North Carolina
The Endress+Hauser introductory course to instrumentation will provide maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations.
P-101 Pressure + Temperature School
May 18-21, 2015
Memphis, Tennnesse
The Endress+Hauser Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies.
P-101 Pressure + Temperature School
May 20-21, 2015
Romeoville, Illinois
The Endress+Hauser Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies.
PTU Test Drive – Free Event
May 29, 2015
Greenwood, Indiana
www.us.endress.com/ptu-test-drive
Free event demonstrates what Endress+Hauser has to offer in the area of process automation training with valuable presentations by industry professionals, tours of PTU® facilities, and a chance to ask questions to our process experts.
June Training Events
I-101 Basic Instrumentation School
June 1-2, 2015
Matthews, North Carolina
The Endress+Hauser introductory course to instrumentation will provide maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations.
I-102 Instrumentation Technology School
June 1-5, 2015
Gonzales, Louisiana
The Endress+Hauser extended course in process instrumentation will provide maintenance and engineering personnel with a deeper understanding of the principles explored in our Basic Instrumentation School.
L-103 Time-of-Flight School
June 2, 2015
Matthews, North Carolina
The Endress+Hauser time-of-flight course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters.
L-103 Time-of-Flight School
June 3, 2015
Greenwood, Indiana
The Endress+Hauser time-of-flight course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters.
F-101 Flow School 1 (Introductory)
June 4-5, 2015
Greenwood, Indiana
The Endress+Hauser introductory course to flow will provide maintenance and engineering personnel with a basic understanding of numerous flow technologies, plus in-depth training on magnetic and Coriolis flow meters.
A-101 pH & Conductivity Measurement School
June 9, 2015
Matthews, NC
The Endress+Hauser pH & Conductivity measurement school will provide maintenance and engineering personnel with a basic understanding of pH and Conductivity analytical technologies.
F-103 Coriolis Flow School
June 9, 2015
La Porte, Texas
The Endress+Hauser Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements.
I-101 Basic Instrumentation School
June 9-10, 2015
Romeoville, Illinois
The Endress+Hauser introductory course to instrumentation will provide maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations.
C-200 Basic Profibus PA
June 9-11, 2015
Greenwood, Indiana
This Basic Profibus training course is an intensive hands-on and theoretical 3-day training program. Upon completion of the 24 PDH course you will receive a completion certificate from Endress+Hauser.
C-201 Certified Profibus PA
June 9-12, 2015
Greenwood, Indiana
This program is officially recognized by PROFIBUS International and represents a worldwide training standard. During the first three days trainees gain a thorough base of knowledge regarding PROFIBUS PA and parts of DP technology. On the fourth day, the program finishes with an exam. The lessons build upon each other in a way that the depth of the course steadily intensifies while core topics are brought home through repetition and the participant's personal hands-on experience.
L-104 Free Space and Guided Radar
June 16, 2015
Memphis, Tennessee
This is an introductory course (8 hours) for Free Space and Guided Wave Radar Level for maintenance and engineering personnel. We will dedicate a half day to each technology to give you a basic understanding of these level technologies. The class will be a combination of classroom and hands-on training on a PTU® (Process Training Unit).
A-101 pH & Conductivity Measurement School
June 19, 2015
Memphis, Tennessee
The Endress+Hauser pH & Conductivity measurement school will provide maintenance and engineering personnel with a basic understanding of pH and Conductivity analytical technologies.
PTU Test Drive – Free Event
June 19, 2015
Romeoville, Illinois
www.us.endress.com/ptu-test-drive
Free event demonstrates what Endress+Hauser has to offer in the area of process automation training with valuable presentations by industry professionals, tours of PTU® facilities, and a chance to ask questions to our process experts.
I-101 Basic Instrumentation School
June 23-25, 2015
Matthews, North Carolina
The Endress+Hauser introductory course to instrumentation will provide maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations.
