Mix-Dispense Valves for Low-Flow Applications

Sealant Equipment & Engineering’s 2600-093 Micro-Kiss Series Mix-Dispense Valves are designed for low-flow mixing and dispensing of two-component adhesives and sealants such as silicones, epoxies, urethanes and acrylics. The valves are used to apply two-part adhesives and sealants for bonding, gasketing, potting and filling processes in aerospace, appliance, contractor, defense, electronics, filters, marine, medical, sporting goods, automotive, truck and bus component dispensing applications. The new mix-dispense valves are based on the company’s Micro-Kiss No-Drip valve body design for low-flow fluid control using bayonet style static mixers. The No-Drip design integrates carbide ball-end needles with carbide seats for long life dispensing of viscous and abrasive materials. On-off actuation of the valves provides controlled flow of each fluid component into the mixer providing a more accurate on-ratio mixing of the low-flow materials. This is a particularly good fit for mix ratios wider than 1-to-1. The 2600-093 No-Drip valves weigh 1.5 lbs, are 1-inch x 1.8-inches wide by 4.9-inches long and are high-pressure rated. The valves are double air actuated for four-way pneumatic valve connections. - sealantequipment.com

REQUEST PRODUCT INFORMATION

Search for more Fluid Handling Products

FOCUS AREA: MONTH: YEAR:

Featured Solutions

View Solutions Directory

Current Issue

Flow Control Sponsors

Mix-Dispense Valves for Low-Flow Applications

Search for more Fluid Handling Products

Request More Information

Most Viewed Products

Featured Solutions

Featured Jobs