• Search Flow Control:
The Leading Information Source for Fluid Handling

Current Issue

Subscribe

Subscribe to the
Flow Control E-News

seepex Progressive-Cavity Wobble Pumping Systems

Flow Control Sponsors

Sage Metering Thermal Mass Flowmeters Sierra Instruments McCrometer Differential-Pressure & Magnetic Flowmeters Bex Spray Nozzles Burkert Fluid Control Systems Omega Engineering Flow, Level, Pressure & Temperature Instrumentation Endress+Hauser Flow, Pressure, Level, & Temperature Instrumentation Viega Pipe Cutting Equipment
Fluid Handling Products
More Fluid Handling Products
Subscribe Print Bookmark and Share
11/28/2011

Nickel-Clad, Fused-Silica Tubing

VICI Valco’s nickel-clad tubing is available with fused silica (FS) tubing, PEEK tubing, and polyimide-coated fused silica tubing. These selections make the nickel-clad tubing a good fit for HPLC and UHPLC use. The fused silica tubing has a thick nickel coating applied to achieve a higher-pressure rating. A thin nickel coating may also be used for resistive heating for fused silica tubing. The nickel also performs as a temperature sensor. Nickel clad FS also allows the use of metal ferrules for improved leak-tight connections. The nickel-clad FS tubing permits resistive heating of columns and transfer lines. It offers improved heat transfer to FS over wire-heating methods. The clad PEEK tubing allows direct connections using metal ferrules to produce enhanced pressure performance. Nickel-clad PEEK tubing comes in 1/32-inch OD (IDs of .002 to .015) and 1/16-inch OD (IDs of .002, to .040) permitting use of PEEK?tubing up to 40,000 PSI. - vici.com


REQUEST PRODUCT INFORMATION

More in Containment/Hose & Tube

Search for more Fluid Handling Products

© 2012 EBSCO Industries, Inc. All rights reserved.
Grand View Media Group is a subsidiary of EBSCO Industries, Inc.

Site Design & Development by the Pinnex Group

Privacy Policy